 Friends links |
|
| Picture |
Heading |
Updated |
 |
SAE 3000 psi flange clamps
SAE 3000 Flange Clamps: one-piece flange clamp system
Introduction of hydraulic fluid power- flange connections with one-piece flange clamps and metric or inch screws:
1.Working pressure of SAE code 61 series flange clamps is 3000 PSI, 3,5 MPa (35 |
2025-04-04 |
 |
DIN Fittings Swivel
1. Definition: 24°DKO swivel connector is according to DIN 3861/DIN EN ISO 8434-4 standard, this end including Fitting body, Nut, O-ring and thrust wire (assembly). There are two types of usage, One is 24°welding cone type nipple (will need nut and o-ring |
2025-04-04 |
 |
DIN Fittings Port Styles
1. DIN Tube Fittings Adapters have Metric male stud, BSPP male stud, UNF male stud, sealing types have Eolastic seal ED, O-ring, O-ring with retaining ring, Metal cutting face, sealing washer and taper thread. DIN adapters will connect to female port ends |
2025-04-04 |
 |
Hydraulic Fittings DIN Union
1. Definition: DIN 24°cone connections is according to standard of DIN 3861/ISO 8434-1dimension, it is German DIN(DEUTSCHE INDUSTRIAL NORME) type. Union type require the all tube end size is the same as DIN 3861 required 24 deg cone from tube to tube.2. M |
2025-04-04 |
|
